My rig is a year newer than yours, but presumably the lift TV mount is the same.
Run the TV down about 1/2 way. At the top of the mount there is a cross bar. It has a hole on each side of it (on top), and if you look in the holes you will see a screw in each of the 2 holes. These screws hold the big plate the TV is mounted to, to the lift mechanism. Remove these two screws and the TV will lift off of the mount holders.
__________________
2013 Winnebago 37F 38' (gas)
2023 Chevy Equinox on the hitch
Full time since June, 2018.
|