I have a 09 39 Journey and my monitor fuse activated a year ago. It is located on the top of the monitor. Unfortunately, you need to remove the top of the dash to get to it . it is not accessible from the drivers side opening. The dash removal is relatively simple - you need to remove the vent covers, the visible screws and
D then pull the top and front off. You need to work from the passenger side. Unfortunately, I don't recall all the details but you should be able to see the next steps as you progress. Be sure to have some wire handy and cut the fuse holder out and extend/wire it to the opening above the accelerator should it fail in the future ( it won't if you do this!!!). Good luck,
__________________
Bob
09 Journey 39Z
Southern Ontario
|