The painted portion of my Winnebago Tour has oxidized like crazy and needs sanding/painting. Does anyone know if you can stand on the painted front cap portion where the antennas are installed With the angle on the front, scaffolding will not get you close enough to sand/paint the front or middle portion. Scaffolding only gets me about 3 feet in from each side. If I can sand or crawl on it, I can manage it from the top.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I've reached almost across mine from a ladder on the side and front and while laying on the roof - there's a bit of give in the cap. Sure don't recommend standing on it. You could try a short paint pole with sanding pad to reach the middle - I do something similar to clean and apply sealant.
__________________
Steve
2015 Itasca Ellipse QD | 2014 Jeep Grand Cherokee
I've reached almost across mine from a ladder on the side and front and while laying on the roof - there's a bit of give in the cap. Sure don't recommend standing on it. You could try a short paint pole with sanding pad to reach the middle - I do something similar to clean and apply sealant.
Thanks for the quick feedback. I'll give laying down with a short pole a try.
Winnebago Tour Roof Cap
With the angle on the front, scaffolding will not get you close enough to sand/paint the front or middle portion. Scaffolding only gets me about 3 feet in from each side. If I can sand or crawl on it, I can manage it from the top.
Linear Mode
