Community Forums

texgirl · 05-11-2025, 06:23 PM

Hoping someone can help me! On my way home to Texas with my new to me 2018 Dutch Star, had it professionally inspected and I know these items were working when we left.. but on our way we noticed all of the sudden the passenger seat was no longer powered.. and out outlets were not working.. Then I pushed some buttons on the inverter after turning gen off ..outlet started working but not the chair.. then got to rv park and one slide the full wall slide would not go out.. no noise at all like it has no power. Checked the breakers. flipped main breaker.. still not working, went out to fuses on outside of coach I don't see any red led lights on showing maybe a fuse is blown.. does anyone have any idea what could be happening?

Thank you in advance!

flyboy013 · 05-11-2025, 08:09 PM

Did you check the two 150A breakers where the chassis batteries are?

JMcG · 05-12-2025, 05:32 AM

texgirl,
Sorry to hear that especially after a professional inspection and on your first trip home. I am sure some of the others on the forum can give you a quick answer as to what happened. The only thing I could suggest is a total reset of all power to your coach and then turn all power back on and see what happens. I think flyboy13 is on the right track with a fuse blown somewhere or possibly a breaker tripped. Good luck texgirl.

PanJH · 05-12-2025, 07:06 AM

I don't have a Full wall slide, so don't know if this applies or not, but my slideouts ( 4 of them) each have a controller. I've had the connectors work loose and I've also
had them go bad. Here's what they look like https://integrityrvparts.com/product...hoCrJAQAvD_BwE

texgirl · 05-12-2025, 09:07 AM

Quote:

Originally Posted by flyboy013

Did you check the two 150A breakers where the chassis batteries are?

Thank you for trying to help me, I went and looked and I am not seeing any breaker in that area...

texgirl · 05-12-2025, 09:08 AM

Quote:

Originally Posted by PanJH

I don't have a Full wall slide, so don't know if this applies or not, but my slideouts ( 4 of them) each have a controller. I've had the connectors work loose and I've also
had them go bad. Here's what they look like https://integrityrvparts.com/product...hoCrJAQAvD_BwE

Thank you! Still trying figure it out .. so much to learn!

texgirl · 05-12-2025, 09:10 AM

Quote:

Originally Posted by JMcG

texgirl,
Sorry to hear that especially after a professional inspection and on your first trip home. I am sure some of the others on the forum can give you a quick answer as to what happened. The only thing I could suggest is a total reset of all power to your coach and then turn all power back on and see what happens. I think flyboy13 is on the right track with a fuse blown somewhere or possibly a breaker tripped. Good luck texgirl.

I did turn off main breaker, how would I do a total reset?

JMcG · 05-12-2025, 09:40 AM

Battery disconnect switch (salesman switch). Chassis batteries disconnect switch. Main breaker switch (mine is above the passenger & driver seat in a cabinet). Unplug main power cord at the Rv site. Wait 10 minutes and then put all switches back to the on position. Lastly plug back in your 50 amp power cord.

arein · 05-12-2025, 10:05 AM

Do your hydraulic jacks function? ie does the pump run if you put them down? The full wall slide is hydraulic so that would help narrow down the issue to the HWH system or not. Do the outlets and lights function in the slide or is it completely dead? That entire slideout is on the inverter so some combination of breakers in your electrical panel and on the inverter itself might explain that.

I believe the passenger seat should be tied to the chassis circuit in some way, that might be a place to start. Check the fuses in the first compartment on the driver side

Best of luck

texgirl · 05-12-2025, 11:01 AM

Quote:

Originally Posted by JMcG

Battery disconnect switch (salesman switch). Chassis batteries disconnect switch. Main breaker switch (mine is above the passenger & driver seat in a cabinet). Unplug main power cord at the Rv site. Wait 10 minutes and then put all switches back to the on position. Lastly plug back in your 50 amp power cord.

thank you will try this and let you know!

Mr. T · 05-12-2025, 04:07 PM

Check the salesman switch by the door

texgirl · 05-15-2025, 09:06 AM

Hey Everyone! We finally made it home.. Dutch Star Don was able to help us get the slide to work!! We also had a stair issue.. but we are home! Drives great, is beautiful.. so now to learn everything and fix the stairs! Thank you to everyone for trying to help me.. this forum is so wonderful because everyone here is so helpful.

flyboy013 · 05-15-2025, 09:13 AM

texgirl - Glad to hear you were able to resolve the issue and make it back home okay. If you wouldn’t mind, what ended up being the problem/solution? It’s always good to have the additional knowledge for when helping others or even ourselves. Thx.

Psp6158 · 05-17-2025, 07:54 AM

Quote:

Originally Posted by flyboy013

texgirl - Glad to hear you were able to resolve the issue and make it back home okay. If you wouldn’t mind, what ended up being the problem/solution? It’s always good to have the additional knowledge for when helping others or even ourselves. Thx.

I was about to ask also. Please share... I wish Mr. Dutch Star was my neighbor. He's amazing on here!