12 VDC water pump relay

[Captain Slow]

Can someone tell me where the Intellitec latching relay is installed in a 2019 Dutch Star 4369 that starts the pump from three locations?

Joe

[Winemaker2]

Only a guess but my money would be - in wet bay near pump behind trim panel.
See if you can follow the wires from the wet bay switch and see anything.

[jerry davis]

In the wet bay, on the wall near the pump.

[WILDEBILL308]

Yes it looks like a rectangle box about the size of a deck of cards. Mine would work if I taped on it with a screwdriver handle, well till I taped a little to hard.
You can get them off Amazon.
Bill

[Dutch Star Don]

In 2018 they stopped using the Intellitec relay. It's now a KIB circuit board that should be located in the power cord bay in the back.

Here's a link to a post on the subject. It has a photo of the board.

https://www.irv2.com/forums/f103/wat...na-521082.html

[10 fan]

Don is correct, it's up high on the right side when looking in the power cord bay. There are other KIB control boards in the rear bathroom closet (black square plastic box). The signals from the switches that turn the pump on go there. I'm still trouble shooting my problem (power to the pump turns off by it self). KIB tech support has been great on my water pump and kitchen slide controller problems. Leave a message and Walt calls back. He has everything including wire colors memorized, he's really good.

[Captain Slow]

Originally Posted by Dutch Star Don

In 2018 they stopped using the Intellitec relay. It's now a KIB circuit board that should be located in the power cord bay in the back.

Here's a link to a post on the subject. It has a photo of the board.

https://www.irv2.com/forums/f103/wat...na-521082.html

Thank you so much Don. I would have never figured that out with assistance. Also thanks for taking the time to add the link!

Joe