2007 slide out issue

[ltmoeller]

On my 2007 dutchstar with 4 slides my front driver slide when in but will not go back out.Need help getting it back out.
Thanks, Tom

[ARFFMAN]

Do you have good voltage to slides. I think it takes at least 12.4 volts. Maybe someone can confirm the correct minimum voltage needed.

[ltmoeller]

Yes my other 3 slides work fine.

[Nevermind Me]

You mention that your slide will not go out. Are the automatic lock arms retracted so the slide can move out? I have an issue with one of mine that occasionally will not open. Tapping on it with a hammer works to get it to operate. I picked up the tip from Dutch Star Don on this forum.

If nothing functions, (no announcement, no attempted opening of the lock arms) you may try switching the wires to the control box of the working slide. These are the two remedies I have read about or been told by Newmar folks.

[ltmoeller]

Bad controller.It lasted 13 months.