2015 Newmar Ventana 4369 flip out dinette window removal

[Texas 4369]

I have a dinette window that is fogged, and I would like to remove and take it in to be re-sealed. These are flush mount windows that have two lower crank out sections. Is there an easy way to just remove this lower movable section without removing the whole window? I have searched the forum and only see others who have removed the whole unit from their coach, but nothing specific to these Ventana windows.

[Rev. Roy]

Not sure exactly where you're located but your best bet would be to take it to a glass shop where they'll remove it, fix it, then reinstall it. If you give a general area you're in I am sure people on this forum can give you suggestions where to take it.

[Texas 4369]

Thanks for the response. My thought was this was such a small window that should be easily removed and repaired. Really was trying to avoid driving the rig to the window place if possible.

[NewmarDave]

I was able to drill out the rivets holding the crank mechanism to the frame which will allow you to remove the arms off the operable pane.
Once that is done, you can rotate the operable pane to the right angle to remove.
Pay attention to that angle so when you go to reinstall it will make it easier.
Good luck.