2020 Mountain Aire - Front Night shade in inch mode :(

[sgilbard]

After a power cycle of the coach, the windshield night shade will only "inch" - IE Have to push the up or down button for 1 second, wait a second then do it again, 1 inch at a time.

On my last coach there was a button to set the shades to 'set-up' for the limits.
Searched around, cannot find a switch.

All other shades work, but of course they do not have limits and max/min when engine is running.

Thanks
Steve

[USMCRET]

This may be helpful.

https://mcdinnovations.com/files/Ownersmanual031318.pdf

[Bobby Dowdle]

The shade has gone into program mode. You need to get a button from another shade and reprogram the limits. This might be difficult as it’s a windshield shade. I would call MCD and have tech support walk you through it. Save a bunch of time.

[sgilbard]

Thanks. If this is MCD then I have had them before on last DP. Switch no problem. Have been EE for a few decades . Thanks. Will read up