Today I winterized my new 2020 Canyon Star.
After draining all the water lines, etc, I hooked up the compressor and blew out the lines. Well, then I took the line to the pump, inserted it in the antifreeze, turned on the pump and it would not pull the antifreeze from the jug. Tried a couple different things like loosening the lines to the pump, but to no avail.
The final solution; I hooked up a hand pump to the fresh water hookup and pumped about 3/4 of a gallon into them. Then put the hose in another jug of antifreeze, turned on the pump, and "wowzaa", it started pulling the antifreeze! And it will suck up a gallon in about 2 minutes! 5 gallons later, job finished!
Blowing out the lines must have caused the pump not to self-prime, thus not picking up the fluid from the jug! I'm always learning something new!
Thought I'd pass this on, in case someone else has the same experience!
So now, I guess I'll have to go inside the coach, turn on the fireplace, enjoy a glass of wine, & think of the adventures yet to come!