After cleaning the filters a few time i have had a few of the plastic push in clips break which requires buying a whole filter assembly. I decided to eliminate the need for the clips. You need 1 inch mending plates mine are black simply put 2 on each assembly.
It holds the filter piece in place and is cover out of site
Picture attached
__________________
Blaine and Amy 2020 Newmar Ventana 4369 (Previous 2013 Winnebago Journey 42e)( previous 2002 Winnebago Journey 39dl)
Blog www.rvparttime.com
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I've probably pulled out the vents around 100 times of the past 12 years to clean the filters and haven't had any issues with the clips. I twist while pulling them and they pop right out
__________________
2013 DS 4338 2015 F-150 toad with kayaks,bicycles and a Harley in the back
new toad 2023 Sprinter with all the toys inside
I've probably pulled out the vents around 100 times of the past 12 years to clean the filters and haven't had any issues with the clips. I twist while pulling them and they pop right out
I had the same setup in my winnie journey those were 12 years old and old one broke the new ones are not nearly as heavy and are flimsy which is why i think they break
__________________
Blaine and Amy 2020 Newmar Ventana 4369 (Previous 2013 Winnebago Journey 42e)( previous 2002 Winnebago Journey 39dl)
Blog www.rvparttime.com
Linear Mode
