My 2015 DSDP didn't come with a front under hood Spigot/Hose Bibb so I decided to finally add one. I'll attach several pictures to show where I ran the PEX and added the Spigot along with a new Faucet so I could run hot, cold or both to it. Also to run a separate hose for the black tank rinse. There will be a couple more items added such as separate shut off valves and another 1 way check valve for the Black Tank Flush. I'll add those picks once the parts come in.
The faucet that I purchased thanks to another thread:
https://www.irv2.com/forums/f103/add...et-533399.html
needed to have the white plastic original mount ground down inside since the threaded ends of the faucet were much shorter then the original faucet. Also the threaded end needed to screw on the new faucet end needed several extra rounds of Teflon tape, (should have used paste Teflon,) to seal properly.
The mount for the Front Hood Faucet was just some 1" PVC with a T end and a 4" u bolt to hold it to the frame. Works great!