Adjusting the main slide out from side to side
Dav L,
Instructions originally posted on 12-03-2020 by Dav L on Full Standard slide room information.pdf
I would need your help for adjusting the main slide out from side to side.
I have to replace the rubber seal around the whole slide out which I have done on the front and the top sides but impossible to do the rear side one as the gap in very narrow when compared to the wide gap for the front side of the slide out.
Your provided instructions said to loosen the nut directly behind the slide out tube (there is one on each tube) and any any brackets that hold the slide out skirt on. Slide out will then slide from side to side, tighten nuts when in the proper place.
I don’t know what nut to loosen. The drawings included in the instructions don’t help much in finding these nuts. So if there is any way that you could guide me to locate those nuts, I would be grateful.
Gaetan
__________________
2006 Dutch Star 4023,
TST TPMS, 2020 Highlander Titanium on trailer
|