There are three common disconnect systems used.. I will give examples of each
1: Perko switch, As the other poster suggested connect both BIG wires to same terminal
2: Solenoid that is out in the open: Same advice
3: Solenoid that is well and truly buried (Example Intelletec Battery Control System) or, what I have.
A heavy gauge wire (I used #4) between the AUX and GENERATOR terminals on the bottom of the box. I just loosened the screws, slid the jumper in with the wires already there and re-tightened till I could fix the switch.
__________________
Home is where I park it!
|