Bay Doors

[montiem]

I have searched the threads and found a lot of info about bay doors but I have another question. My Dutch Arie has two doors that are not aligned, they have a continuous hinge and I cannot figure out how to adjust them. They are misaligned from top to bottom, unless I remove the hinge screws and move them I do not see a way to adjust, does the screws have a slide groove, I did not take one off to see if there is an adjustment.

Montie

["007"]

Here is a thread with different methods of removing doors off slide rail to work on. The rail should be fastened to floor level of coach why your doors are out of alignment may only require tighten the screws on rail attached to door frame.

["007"]

Follow instructions in this post.

[montiem]

Just as a update on the bay doors out of alignment. I was at Newmar last week I asked one of the guys how to adjust the doors, he simple said to tighten the catches and they would pull into alignment. I did and sure enough it worked ok, not great but ok. Some of the doors was out at bottom and by tightening the catch and the keeper moved the
L door in and tight against the bumpers. I do think that a better system could be developed, maybe a two latch and two keeper system.

I am satisfied with the alignment and it looks a lot better, now on to the next project