Bedroom slideout fuse location 2015 LADP

[sponserv]

Hi all,



First of all I hope everyone is safe and sound from hurricane Ida.



Just replaced house batteries. Thank god for all the KIB low voltage protection boards. I had to replace a couple fuses and jump a couple wires to get the Silverleaf going again and I thought all was good. Got to my location and all slides go out except the bedroom slide. I push the button and nothing. Not even a click.


I know these things hate low voltage worse that high voltage. So I am going to check the bedroom slide module but first need to find the fuse that feeds the motor. Do you know what panel it is on and what number it may be? Or is it a fusible link at the motor?


Is there a trouble shooting tree for this issue? It is not the infamous loose bolt issue as I am getting absolutely nothing when I press the switch. Oh wise ones....please advise.

[Bobby Dowdle]

You should have a controller in the basement on the passenger side mounted on the frame rail. This should be in bay 4 right before the peg board bay. Check to see if you see any lights on that controller. I believe the power is coming from a circuit breaker in the shore cord bay. Do you have a test light to check for voltage on the breakers behind the black panel?

[sponserv]

Hi Bobbie


Thanks for responding. That bedroom s/o module in Bay 4 does have three LEDS (red, yellow and green) but none of the lights are lit.


Is there a wiring diagram available that may show me which circuit breaker or fuse that may be in the shorepower compartment?