Black and gray tank rinse system

[Any ole Joe]

System has always worked perfectly, connect a water hose, rinse system started immediately. Yesterday, could not hear the rinse; however, there was some water draining out. Occurred on both the black and grey tanks. I assume the system works on water pressure and doesn’t have fuses or electrical pumps. I am careful to keep our tank clean. Any thoughts?

[Skip426]

Can you get a good look at the screen washer in the hose attachment ?

If water supply at the last flush had any sediment then the screen could be plugged , restricting flow to the flush nozzle in the tank.

[Any ole Joe]

Originally Posted by Skip426

Can you get a good look at the screen washer in the hose attachment ?



If water supply at the last flush had any sediment then the screen could be plugged , restricting flow to the flush nozzle in the tank.

Thanks Skip42,
I didn’t see anything in the screens, so I changed hose and used a 5’ hose connected to the MH tap…now it works perfectly. Must have had a partial obstruction in the hose I use for the tanks. Guess it makes sense since it affected both the black and gray tank rinsing…Crazy! Glad it was something simple . Thanks for the reply!