Blinking green light on magnum

[skippy67]

The green charging light is blinking, but will sometimes be on continuouslyif I push the charge button. I cleaned the two connections, one of the inverter and the other on the house battery connection button no luck. While being in the belly I don’t hear the fan anymore. Will this damage the inverter by still using it with this light blinking or the fans easy to change? Thanks for any advice by the way,We are on the roadDave.

[Punkinhead]

What light is blinking, the charge light on the remote? It should give a message if it's blinking. For example, I have mine programmed as "Silent" for the Final Charge setting so the charge light will blink after the battery has reached its float charge voltage until it discharges down to the rebulk voltage.

[skippy67]

Originally Posted by Punkinhead

What light is blinking, the charge light on the remote? It should give a message if it's blinking. For example, I have mine programmed as "Silent" for the Final Charge setting so the charge light will blink after the battery has reached its float charge voltage until it discharges down to the rebulk voltage.

I said the chaging light. It is the light just above the inverter light. When I push the on/off charger button it quits flashing green and then goes back to solid green.i appreciate your help. I will get the manual as I didn’t know this was something programmed. I will do my best but electrical workings beyond residential AC is a mystery to me. I’ll try programming the magnum and will let you know.Dave

[richpatty]

Like mentioned, it will blink when it reaches full charge…. And the display should indicate that.