Changing Authority Code for Coach Entrance
I was reading through the manual for changing the Authority Code, and Access Codes for the Trimark door System. I find the instructions less than complete and am asking for help. I am trying to learn and understand before my next trip to the RV in storage.
The Authority Code has only one purpose; it grants the owner the ability to set new Access Codes. The Authority Code must be EXACTLY 5 digits long. There are two ways to set the Authority Code with the TriMark Full Feature System. Changing the Authority Code erases all previous Access Codes and sets a new Access Code in memory bank 1 that is the same as the new Authority Code.
1. [Press and release the push button 3 times[/U][/B]. Wait 3 seconds. The keypad will beep for 3 seconds. The keypad is now in “Learn Mode”.
What "Push Button" are they referring to. We have 4 buttons labelled 1-4 and the door bell button.
Newmar Owners Club
Tom, Dana, and Max & Rolex
20 Newmar MA 4569 with 18 Jeep JL