Clock module in Essex

[greg-1]

There was a post on here some time ago someone sent their rear stat to the uk for programming i have searched and cannot find post i am hope who ever had this done sees this post i was trying to see what the cost was and if it worked coachlight has one sent off now but will not be back for appx 5 weeks if its not to expensive i was gonna try it . and no they do not give estimates already ask a new one is 3200.00 sure didnt want to buy new thanks

[palehorse89]

Maybe what you are looking for here Greg: https://www.google.com/search?q=Cloc....com&x=24&y=14
, take a look through these and see if you can find what might help you out.

Or maybe this http://www.irv2.com/forums/f103/e-pl...ng-103800.html

[charlie hamby]

I sent my rear display back to Newmar and they shipped it of to be repaired.Three months later I get it back,hook back up,reprogram and still not working.Sent back to Newmar they updated and programmed with latest programming.I reinstalled still did not work.Newmar now says the front clock needs to be calibrated for new display, which a dealer has to do.
The closest dealer to me that can do that is 800 miles round trip so it's going to be a while before it is done.

[greg-1]

Charlie I have been chasing answers all over on this. coach light in Carthage Missouri said some units cannot be unhooked from the 12 v system over a couple of hours but some can that is in like my 2006 a few years later 07 or 08 they fixed this that is why I didn't want to ship it and have same issue as you and like you I am appx 700 mile round trip. Bummer I am thinking of just getting new ones maybe that is if my extended warranty will cover? Worth a try!

[greg-1]

Originally Posted by palehorse89

Maybe what you are looking for here Greg: https://www.google.com/search?q=Cloc....com&x=24&y=14
, take a look through these and see if you can find what might help you out.

Or maybe this http://www.irv2.com/forums/f103/e-pl...ng-103800.html

Thanks palehorse

[spinn]

Charlie where are you located?

[charlie hamby]

Orange Beach,Al

[charlie hamby]

Greg1,
Have you tried to reprogram the module itself from the front clock?

[greg-1]

Originally Posted by charlie hamby

Greg1,
Have you tried to reprogram the module itself from the front clock?

Charlie first I knew of this I am all ears

[FlyingDiver]

To reprogram all remote modules:

1. Press and hold the "Tanks" button (bottom left) for 10 seconds. Release.

2. Screen should have changed. Press "Stop". This halts the E-plex system.

3. Press button below "ALL". This is "reprogram all remote modules".

4. Press button below "YES". Do it.

5. Wait.... Ignore timeout messages.

6. Press button below "STR". This resumes E-plex operation.

If anything goes wrong, you're on your own...

["007"]

I plan on gatering all these link on Essex E-Plex programing and put them in one spot in QT's # 3.
Right now they are everywhere think it will be easier in one place not sure I can just move the download or just move a post with the downloads in it, I do not want to lose any.
May move posts like Divers instructions also, so stay tuned.
Question is E-Plex also in the KADB???

[FlyingDiver]

E-Plex was in Essex (EXDP) and King Aire (KGDB). Might have been in some models of Mountain Aire, but I'm not sure on that.