Quote:
Originally Posted by Burgy
Was adding a light to the driver overhead cabinet so I can see the switches and things. Not sure y Newmar left that out....
Anyway the doorbell chime has exposed contacts and I must have popped the fuse for that circuit when I was moving things around.
There are no blown fuses in the bath or front drivers side fuse panel and everything else seams to work. I checked the power to chime before and it was good, another head scratcher is y they are not covered with something.
Just another if they can't see it, it doesn't matter thing I suspect.
AS the manual is only good for a paper weight and there are no other documents on the portal or in my bag stating what circuits are coved by what fuse or what location they might be I sent a note to Newmar, can't wait to hear this answer.
TIA
|
I’ll be watching to see what Newmar’s response is.
Funny to me is that just yesterday, I put a light on that door to be able to see the switches and displays. I put a 3” led puck light on mine powered by 3 AAA batteries that is motion activated when you lift the door. Really simple thing.
Hope you find your problem.