Quote:
Originally Posted by Road_King
Fuse is good, checked the switch and reconnected the wires for a better contact, and still not working. When I engage the switch, there is a load because the monitor dims for a second and the overhead fan slows down.
Is it the motor? Any suggestions or opinions?
Thanks,
~George
|
The only time my 04 Mtn Aire 4016 power window won't work is when one wire came off.. I carefully pulled the switch up and reconnected the wire. No problem since.
BUT, if you hear it trying to operate, that means the switch is powered and it points to the mechanism is jammed or needs a little grease.. Try putting your palm on the window while pushing the switch at the same time.. Maybe it's just stuck in the up position.
Whenever you figure it out, let us all know your final solution so we can all learn