We have a 2013 Newmar Venana LE. I have a switch I would like to dis-assemble to check it out. The switches are plastic switches in the areas adjacent to the affected lights. Anyone know how to get the facia off of the switch to check the wiring?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
The facia snaps off the backing, then the backing unscrews from the wall or panel. A carefully inserted plastic putty knife will usually pop the facia right off, but be sure you are not doing such in a cold coach or the facia will break. Just insert about 1/8 of an inch so you are just under the facia.
Thanks, Oregonpharme, that did it. I was afraid to pry it without knowing if it would break anything. Anyway, I pryed it off, and solved my problem. Thanks again.
Linear Mode
