Entry door latch lock open

[Contender]

We’re having a problem with the entry door staying open.
It has gradually gotten looser this month.
It seems like there should be a catch mechanism at this joint?

Is there an adjustment section in Newgle we're missing?
https://newgle.newmarcorp.com/s/

[RVStitchy]

Going by recollection and prior posts I think the small horseshoe detail in the middle of the arm should grab onto a pin. That wears with time. Maybe it can be bent a little? Otherwise replace the arm.

[Bobby Dowdle]

The catch in the center of the hinge gets worn out and you have to replace the entire mechanism. Reach out to any NIRVC parts department for assistance with the a replacement parts.

[Clemson]

Originally Posted by Contender

We’re having a problem with the entry door staying open.
It has gradually gotten looser this month.
It seems like there should be a catch mechanism at this joint?

Is there an adjustment section in Newgle we're missing?
https://newgle.newmarcorp.com/s/

You can spend $120 for a replacement arm or a nickel on a “small” plastic tie wrap placed very tightly around the “post” that slides into the “C” shaped opening…cut off excess tie wrap. I did this 3 years ago on a Ventana 4369 and it’s still working perfectly

[Mr. T]

I replaced mine last year and ordered it from PLT engineering.
https://ptlengineering.com/order-par...en-mechanisms/