Essex LED Light Switch

[jtovo]

I cannot get the LED switch above the bed to work, I’ve tried turning off the 12 volt batteries & it does light up but doesn’t function & shuts off after a minute or two.
Has anyone experienced a problem similar to mine ?

[Steele]

On my 17 DSDP there is a 29 amp fuse in the half bath on the 12 VDC panel. It is labeled KIB Aux I believe. Pull it out, wait a few seconds and reinsert.

If that is no joy then the panel above the bed can be removed by prying it down. The connector to the switch panel can be removed and reconnected. These panel are each programmed for the location it’s installed. If you need to order one make sure you get the part number from the board and have a picture ready to send to the Newmar parts counter guy.

Good luck!

[jtovo]

Thanks,
I will try your suggestions.