I would look at the MaxxAir vent covers as they don't require you to disrupt the caulking around the roof vent to find existing screws or drill new holes to hold the cover on. The MaxxAir uses a set of metal brackets that you install to the metal edge of the roof vent above the roof line.
I installed the MaxxAir covers over both vents of our previous 195RB and they worked really well. I liked being able to leave the vents open when traveling as well as when it was raining. I would recommend using a little blue loctite on the threads when mounting to help prevent them loosening after you've been bouncing down the road for a while.
If you look closely at the picture below you can see the metal bracket attached to the side of the roof vent above the roof line - easy to install and no fear of causing a leak by poking around the caulking and having to reseal it:
__________________
TT: 2019 ORV Timber Ridge 23DBS, Blue Ox SwayPro 15K/1500
TV: 2019 Ford F-250 XLT SuperCab LB, 6.2L, 4.30/e-locker, 4x4, 164" WB, RoadActive Suspension
|