Community Forums

ianschneider · 07-13-2019, 09:29 AM

Hi all - All of a sudden the fresh tank gauge stopped reading. I checked the white plug and the connections to the gauge. The green light is blinking on the gauge and I tried a reset. I had the tank full and we ran off the tank and the pump for awhile. After a bit the grey tank had gone from 0 to 25%, but the fresh tank was still reading 100% (we had a full tank when I did the reset). Any ideas? Oh, we also tried a battery disconnect for 10 seconds to reset it. The other gauges are working fine. We drive a 2018 Newmar Dutch Start 4052.

Thanks

10 fan · 07-13-2019, 09:06 PM

Mine also work when they want to. I was told Newmar has a new program to fix this problem. I just pulled in to the new camp ground at Newmar for Mondays appointment and will have mine checked. Are you on your way to Alaska? We will miss both of you at Spartan.

ianschneider · 07-13-2019, 09:24 PM

Quote:

Originally Posted by 10 fan

Mine also work when they want to. I was told Newmar has a new program to fix this problem. I just pulled in to the new camp ground at Newmar for Mondays appointment and will have mine checked. Are you on your way to Alaska? We will miss both of you at Spartan.

We're IN Alaska. We're in Fairbanks. I'LL call them on Monday. It's acting weird. We were out all day. I checked it when we got back and it said 75% for a second then went back to 100%. A few minutes later it said 80% jumped to 100% then to 90% and landed at 95% for a bit then back to 100%!!