Full wall slide support shaft gasket

		iRV2 Forums > THE OWNER'S CORNER FORUMS > Newmar Owner's Forum
Full wall slide support shaft gasket

Click Here to Login

Files

Vendors

Registry

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.

This discussion is proudly sponsored by:

Please support our sponsors and let them know you heard about their products on iRV2

Thread Tools

Search this Thread

Display Modes

03-22-2025, 06:24 AM	#1
richpatty Senior Member Newmar Owners Club Freightliner Owners Club iRV2 No Limits Club Join Date: Aug 2013 Posts: 1,093	Full wall slide support shaft gasket Hi all, The gasket that helps "seal" off the basement storage where the support shafts slide into to the RV has become brittle and are crumbling. Have any of you gotten creative to replace it with something other than the standard slab of rubber Newmar used? I have ordered new ones from Newmar twice and they never last. Have others run into this…and if so, what other solutions have you used? Let me know. Thanks everyone! Rich Attached Thumbnails __________________ 2017 Newmar Ventana 4310 1,440W solar / 800 AH Lithium 2007 CR-V

Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Join iRV2.com For Free - Click Here

03-22-2025, 04:56 PM	#2
Dutch Star Don "Formerly Diplomat Don" Newmar Owners Club Join Date: Apr 2005 Location: Moorpark, Ca. Posts: 25,682	I would buy 1/8" rubber on Amazon. It comes in rolls in various widths and make your own. __________________ Don & Mary 2019 Newmar Dutch Star 4018 (Freightliner) 2024 GMC Sierra 1500 Denali 4x4 6.2L

03-23-2025, 07:38 AM	#3
richpatty Senior Member Newmar Owners Club Freightliner Owners Club iRV2 No Limits Club Join Date: Aug 2013 Posts: 1,093	Thanks Don….thats where I was leaning towards doing… __________________ 2017 Newmar Ventana 4310 1,440W solar / 800 AH Lithium 2007 CR-V

Tags

gas, gasket, slide

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Structural cracking to full wall slide support	britcon	Newmar Owner's Forum	9	11-16-2021 05:53 PM
Girard Full Wall Slideout Awning latch support	ghaynes754	Newmar Owner's Forum	12	05-04-2019 07:02 AM
Rear axle shaft gasket....really?????	Motor7	Workhorse and Chevrolet Chassis Motorhome Forum	12	05-03-2018 07:16 PM
2007 Knight DFT Full Wall Slide Topper Support Hardware	Stan&Jacquie	Monaco Owner's Forum	8	11-15-2015 04:00 AM
Full wall slide will not full retract	corjaguar	Winnebago Industries Owner's Forum	27	04-05-2014 02:51 AM

» Recent Discussions
2004 Discovery 39S, HYD. Jacks
I-75 south from Jellico to...
Strange noise!!!
looking for a FRONT RUN BAY...
Insurance shock!
I-20 Through Shreveport
toad setup, brakes needed?
Will it work
Goooodmorning!!!
Bim
Not starting/stalling 454
Why Quartzsite?

» Featured Campgrounds

Reviews provided by

All times are GMT -6. The time now is 04:44 AM.

Community Forums

RV Camping Forums

RV Lifestyles Forums

Regional

Motorhome Forums

Truck Convs, MDTs, HDTs

Travel Trailer/5th Wheel

Powertrain Garage

Chassis Club

RV Systems & Tech

Registry

A - M

N - Z

Photo Categories

Recent Trailer Photos

Options

Recent Listings

You may also like: