Fuse for LPG detector DSDP 4024

[jarwiebe]

Need some help in locating a fuse.

I have no 12 volt power at the LPG detector and am trying to trouble shoot the cause. The switch in the overhead cabinet for the LPG detector is on (switched it back and forth several times but no joy). I have been unable to locate a fuse for it so wondering if anyone has an idea where to look? I have checked in the front left basement compartment and in the electrical panel in bathroom but can't find one labeled LPG or detector or any variation of the two.

[GaryKD]

Hi jarwiebe,
There are additional 12 VDC fuses in the compartment where the shore power cord and transfer switch are located. They are located behind a cover. The cover may be black and held on with Velcro.

[jarwiebe]

Originally Posted by GaryKD

Hi jarwiebe,
There are additional 12 VDC fuses in the compartment where the shore power cord and transfer switch are located. They are located behind a cover. The cover may be black and held on with Velcro.

You were right on Gary, thanks a bunch.

In behind the panel ( mine was screwed down) was a fuse block but the slot labeled LPG detector had no wire to it but there was one unlabeled slot with a wire to it but no fuse. I put a 5 amp fuse in it and, sure enough I had power at the detector. My next problem is the detector is malfunctioning, flashes red only, no response when I press the test button, no sound nothing, so I will need to get a new detector but I now have power.

["007"]

If any one has a Workhorse chassis the fuse is in a bunch of wires coiled up to the right of hood opening near fire wall, its a 1 amp fuse.
May find a match here for LP Detector.