Community Forums

Arizona Lizards · 10-02-2019, 12:37 PM

I have been reading numerous threads concerning the C-Storm water pump controller (which I think is causing my water pump not to work). Here is my current dilemma - I cannot understand what is being said in the PDF concerning the green and yellow lights.
If I am reading the information correctly, the GREEN light is lit and stays on whenever the water pump is turned on from either an inside touch pad OR the momentary switch found in water bay. The YELLOW light is only lit when the pump is called for use by turning on a faucet or flushing a toilet.
Is that correct?
Thanks for any help.
Lisa

Just George · 10-02-2019, 02:53 PM

Arizona

I don't believe your statement regarding the yellow LED is correct. Based on the info you posted it is saying if the Green LED comes on when a switch is pressed it indicates the switch portion of the circuit is working. If the yellow LED comes on but the "load" (meaning pump motor) does not run it indicates there is a problem with the load circuit. (possibly the pump motor).

Just George · 10-02-2019, 03:44 PM

Here is a link where they talk about how to bypass the controller to isolate the issue between the controller or the pump.

http://www.irv2.com/forums/f103/wate...ump+controller

Arizona Lizards · 10-02-2019, 05:04 PM

Sooo, I had some of the friends we have made (Steve Mosier and others) come to take a look and try to help me understand the wiring. Of course after pulling off the shower area, easy way to see pump and controller, the stupid thing started working. I think I have some loose wires, will have it all checked our when I get back to home base. I am going also ordering an extra controller and pump.

Arizona Lizards · 10-02-2019, 05:05 PM

Quote:

Originally Posted by Someday Came

Arizona

I don't believe your statement regarding the yellow LED is correct. Based on the info you posted it is saying if the Green LED comes on when a switch is pressed it indicates the switch portion of the circuit is working. If the yellow LED comes on but the "load" (meaning pump motor) does not run it indicates there is a problem with the load circuit. (possibly the pump motor).

Thanks for the information and the link you provided.