How to solve ramp problems
1. replace ramp surface ( too slippery) Paint over with Norklad 210
TECHNICAL DATA- NP210 SLIP RESISTANT (SKIDPROOFER) EPOXY COATING
2 paint lines going up ramp so that you are aimed correctly to drive into wheel chock, this allows you to maintain speed up ramp Add Grit #8 to paint
3. raise front leveling jacks, this will lower the rear of the 3921 and lower the pitch of the ramp
4. purchase race ramps so that motorcycle tail pipes don't hit ground
5. power engine and use clutch to descend the ramp slowly
|