|
03-24-2020, 05:07 PM
|
#1
|
Senior Member
Join Date: Aug 2013
Location: Haslet, Texas
Posts: 1,122
|
HWH & Auto Level
Not sure why but Auto Level doesn't work.
If I hold the button for a while I get a blue blinking light but no response.
I can manually level with no issues.
Puzzled
__________________
2013 Newmar Dutch Star 4318 Which now Identity's as a 2015
2022 Ford F250 Lariat 4X4
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
03-24-2020, 05:15 PM
|
#2
|
Senior Member
Join Date: Apr 2011
Posts: 597
|
I just press and release, have you tried that. Hope this works
__________________
Kevin
2020 London Aire 4543
2019 Dodge Ram 1500. Emerald Isle NC/ Old Beau Roaring Gap NC
|
|
|
03-24-2020, 05:23 PM
|
#3
|
Senior Member
Texas Boomers Club
Join Date: Dec 2003
Location: Mo/Texas
Posts: 3,555
|
That's what we do also. Press and release the auto-level button. Works as intended.
|
|
|
03-25-2020, 04:53 AM
|
#4
|
Senior Member
Join Date: Sep 2016
Location: Sarasota, FL
Posts: 5,228
|
On my 610 system I have to press the level button twice for it to start the auto level process.
__________________
Rick and Larrie Dee
1997 40' Newmar London Aire DP CTA 8.3 (Mechanical) 325 Spartan MM
Bringing her back to her glory.
'08 Jeep GC Overland.
|
|
|
03-25-2020, 06:33 AM
|
#5
|
Senior Member
Join Date: Aug 2018
Location: UP Michigan
Posts: 437
|
Never use mine and it is the new one installed by Stewart service...Call them in Elkhart they can help...
I elect to use the manual mode to level and auto store to leave..
__________________
2009 Allstar 4188 mid-spartan 400
|
|
|
03-25-2020, 08:14 AM
|
#6
|
Senior Member
Join Date: Aug 2013
Location: Haslet, Texas
Posts: 1,122
|
Quote:
Originally Posted by 96kpmjmm
I just press and release, have you tried that. Hope this works
|
That's what I normally do but now nothing happens.
__________________
2013 Newmar Dutch Star 4318 Which now Identity's as a 2015
2022 Ford F250 Lariat 4X4
|
|
|
03-25-2020, 09:37 AM
|
#7
|
Senior Member
Commercial Member
Join Date: Jun 2005
Location: behind the steering wheel
Posts: 2,520
|
dkritter, you need a service manual to test your system. is it a 610 system? if you email me at pfmaddox@att.net, i will send you one. usually, if the system works in manual mode, its either a bad connection or control box. you should do the testing per the manual to save you some money.
you are welcome to call me at 1 602 549 3638. i would like you to do some testing first, so that i can help with the diagnostics.
paul maddox
i work full time for hwh corp. i do not solicit part sales or service work on this forum.
|
|
|
03-25-2020, 11:07 AM
|
#8
|
Senior Member
Join Date: Aug 2013
Location: Haslet, Texas
Posts: 1,122
|
Quote:
Originally Posted by azpete
dkritter, you need a service manual to test your system. is it a 610 system? if you email me at pfmaddox@att.net, i will send you one. usually, if the system works in manual mode, its either a bad connection or control box. you should do the testing per the manual to save you some money.
you are welcome to call me at 1 602 549 3638. i would like you to do some testing first, so that i can help with the diagnostics.
paul maddox
i work full time for hwh corp. i do not solicit part sales or service work on this forum.
|
Thank You very much, I sent you an email.
__________________
2013 Newmar Dutch Star 4318 Which now Identity's as a 2015
2022 Ford F250 Lariat 4X4
|
|
|
03-25-2020, 06:40 PM
|
#9
|
Senior Member
Join Date: Oct 2016
Posts: 275
|
We had this same problem a couple years ago. I spoke with HWH and they said if it worked manually, but not with the auto button, it was a bad button that required a replacement of the front panel (Don't remember if the control circuit was on it or not). Got the new panel, and it has worked fine ever since.
|
|
|
03-26-2020, 06:31 AM
|
#10
|
Senior Member
Join Date: Aug 2013
Location: Haslet, Texas
Posts: 1,122
|
Quote:
Originally Posted by Ed Headington
We had this same problem a couple years ago. I spoke with HWH and they said if it worked manually, but not with the auto button, it was a bad button that required a replacement of the front panel (Don't remember if the control circuit was on it or not). Got the new panel, and it has worked fine ever since.
|
Thanks Ed, I agree.
__________________
2013 Newmar Dutch Star 4318 Which now Identity's as a 2015
2022 Ford F250 Lariat 4X4
|
|
|
03-26-2020, 06:37 AM
|
#11
|
Senior Member
Join Date: Aug 2013
Location: Haslet, Texas
Posts: 1,122
|
Shoot out to AZPete and HWH. You're good people.
AZPete sent me a repair manual and walked me through checking the system and concluded the button has gone bad and gave me my options on getting it corrected.
__________________
2013 Newmar Dutch Star 4318 Which now Identity's as a 2015
2022 Ford F250 Lariat 4X4
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|