Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Newmar Owner's Forum
Click Here to Login
Register FilesVendors Registry Blogs FAQ Community Calendar Today's Posts Search Log in
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 10-23-2021, 04:22 PM   #1
WTB
Senior Member
 
Join Date: Jul 2013
Posts: 204
HWH Hydraulic Solenoid Valves Purchase or Rebuild

Some basic information. I own a 2005 Newmar Kountry Star. I'm located in central Florida.

OK, the issue is none of the four leveling jacks will hold weight. RV tech did a complete diag and states that the four hydraulic solenoid valves are leaking.

So, other than going to HWH does anyone have a source for these valves or does someone know where they can be rebuilt by someone in my area.

Thanks in advance
__________________
On The Road Of Retirement
2005 Newmar Kountry Star
WTB is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 10-23-2021, 05:49 PM   #2
Senior Member
 
Ray,IN's Avatar
 
Join Date: Aug 2001
Location: North America somewhere
Posts: 30,982
Stewarts Services in Elkhart IN.
__________________
2000 Winnebago Ultimate Freedom USQ40JD, ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG 11B5MX,Infantry retired;Good Sam Life member,FMCA." My fellow Americans, ask not what your country can do for you, ask what you can do for your country. John F. Kennedy
Ray,IN is offline   Reply With Quote
Old 10-23-2021, 08:50 PM   #3
Senior Member
 
Join Date: Aug 2020
Location: Ohio
Posts: 2,353
Any way to flush them? There has to be a way to pull them and clean them up.. either by back flushing or actually pulling each one and cleaning.. I read here.. not suggesting this is your problem.. that the shuttle valve can go bad.. have you looked there?
Just odd speculation on my part.
Good luck and let us know what you did and maybe better members then me will help you
__________________
2000 southwind storm, workhorse custom chassis with 7.4l vortec
donr103 is offline   Reply With Quote
Old 10-24-2021, 04:10 AM   #4
Senior Member
 
Join Date: Sep 2016
Location: Sarasota, FL
Posts: 5,228
I sent all 4 of my solenoids to HWH and they rebuilt all for $150 - less than the cost of one new one. It took just a couple weeks to get them back. I'd send email to their CS and ask if you can send them in and how long to get them back. I think they may have staffing problems right now so it may take a a little longer.
__________________
Rick and Larrie Dee
1997 40' Newmar London Aire DP CTA 8.3 (Mechanical) 325 Spartan MM
Bringing her back to her glory.
'08 Jeep GC Overland.
RKins is offline   Reply With Quote
Old 11-12-2021, 12:57 PM   #5
WTB
Senior Member
 
Join Date: Jul 2013
Posts: 204
All's well that ends well

I found an HWH distributor here in central Florida and was able to obtain all the parts I needed.
__________________
On The Road Of Retirement
2005 Newmar Kountry Star
WTB is offline   Reply With Quote
Old 11-13-2021, 04:37 AM   #6
Senior Member
 
Join Date: Sep 2016
Location: Sarasota, FL
Posts: 5,228
Who is the distributor? It's always good to have a backup to the factory and Stuart's.
__________________
Rick and Larrie Dee
1997 40' Newmar London Aire DP CTA 8.3 (Mechanical) 325 Spartan MM
Bringing her back to her glory.
'08 Jeep GC Overland.
RKins is offline   Reply With Quote
Old 11-14-2021, 07:02 AM   #7
WTB
Senior Member
 
Join Date: Jul 2013
Posts: 204
LazDays in the Villages
__________________
On The Road Of Retirement
2005 Newmar Kountry Star
WTB is offline   Reply With Quote
Reply

Tags
hwh, hydraulic, purchase, rebuild, solenoid, valve



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hydraulic Solenoid Valves cadiwa Tiffin Owner's Forum 6 04-09-2020 12:27 PM
Black and Gray valves.....why not Ball valves? MuxedUpHRI Class A Motorhome Discussions 26 03-23-2017 06:06 PM
Water Tank Fill Solenoid Valves - APEX Renipladlo Alpine Coach Owner's Forum 5 10-11-2011 10:02 AM
Solenoid valves - water drain issues GypsyTurtle Country Coach Owners Forum 2 06-14-2009 08:12 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 10:12 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.