|
|
03-09-2019, 01:06 PM
|
#1
|
Senior Member
Newmar Owners Club
Join Date: Aug 2015
Location: Greensboro, Ga.
Posts: 455
|
Intervac system stopped working?
On my 2019 my intervac vacuum system stopped working.
There is power to the unit and vac handle light comes on when pressed
Tried using it inside coach and in basement but same.
There’s power but vacuum not turning on.
Checked for hose clogged
Bag full
Everything seems fine
Any ideas????
__________________
Dave H
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
03-09-2019, 01:27 PM
|
#2
|
Senior Member
Join Date: Jan 2017
Location: Titusville, FL
Posts: 5,164
|
Quote:
Originally Posted by Golferdave78
On my 2019 my intervac vacuum system stopped working.
There is power to the unit and vac handle light comes on when pressed
Tried using it inside coach and in basement but same.
There’s power but vacuum not turning on.
Checked for hose clogged
Bag full
Everything seems fine
Any ideas????
|
The vac handle light is powered by low voltage DC from the vac control circuits and does not confirm there is power to the vac.
The vac itself (ie:motor) needs 115AC.
Are you on shore power?
Check to make sure the vac AC power cord is plugged in.
Check vac AC power circuit breaker.
Look for a tripped GFCI.
Verify presence of AC power at vac power cord.
__________________
When seconds count, the police are only minutes away.
2023 Grand Design 2600RB, 2022 F-350 King Ranch tow vehicle, Titusville, FL when not on the road
|
|
|
03-09-2019, 01:39 PM
|
#3
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: Jun 2011
Location: Texas
Posts: 6,427
|
The handle is actually battery operated and rf remote to the main unit. Maybe your battery is dead.
__________________
2022 London Aire 4551 * 2022 GD Imagine 2800BH * 2021 RAM 3500 DRW * 2020 Wrangler
NHSO (Newmar Hoot, Sevierville Original)
Kindness Matters
|
|
|
03-09-2019, 02:13 PM
|
#4
|
Senior Member
Newmar Owners Club
Join Date: Aug 2015
Location: Greensboro, Ga.
Posts: 455
|
The kick plate on the floor isn’t working gotta be power me thinks!!!!!
__________________
Dave H
|
|
|
03-09-2019, 03:51 PM
|
#5
|
Senior Member
Join Date: Apr 2012
Location: Il
Posts: 390
|
I've starred in this movie! Check for a GFI in the 1/2 bath medicine cabinet. Only took me an hour to find it.
__________________
2016 4519 Newmar Essex (FCCC)
2015 AWD Ford Explorer
2017 Chevrolet Silverado.
|
|
|
03-09-2019, 05:29 PM
|
#6
|
Senior Member
Newmar Owners Club
Join Date: Aug 2015
Location: Greensboro, Ga.
Posts: 455
|
Found GFI in medicine cabinet
It was ok
__________________
Dave H
|
|
|
03-10-2019, 08:44 AM
|
#7
|
Senior Member
Join Date: Apr 2012
Location: Il
Posts: 390
|
Well I found two others during my process that may be of interest to you. In our 1/2 bath, there are two fake doors that are clipped in place. They just pull forward to remove. There is a GFI on the exterior wall that may be your problem. Although unrelated, I also found one under the sink in the rear bath.
You might want to just plug your vac. into an extension cord temporarily to verify that it is ok.
__________________
2016 4519 Newmar Essex (FCCC)
2015 AWD Ford Explorer
2017 Chevrolet Silverado.
|
|
|
03-10-2019, 01:31 PM
|
#8
|
Senior Member
Newmar Owners Club
Join Date: Aug 2015
Location: Greensboro, Ga.
Posts: 455
|
My intervac is plugged into a 110 in the basement
I plugged my air compressor into the exact plug and there is power.
Replaced battery in handle
Still no vac
Is there a reset on the vac , if so I can’t find it.
Gonna call intervac 1-800 tomorrow morning
At Ca,p Hulf right on the beach lots of sand need the vacuum
__________________
Dave H
|
|
|
03-10-2019, 01:44 PM
|
#9
|
Senior Member
Join Date: Oct 2012
Location: Foley AL
Posts: 7,138
|
Quote:
Originally Posted by Golferdave78
My intervac is plugged into a 110 in the basement
I plugged my air compressor into the exact plug and there is power.
Replaced battery in handle
Still no vac
Is there a reset on the vac , if so I can’t find it.
Gonna call intervac 1-800 tomorrow morning
At Ca,p Hulf right on the beach lots of sand need the vacuum
|
and it works for sand in the toad ...
https://www.walmart.com/ip/Hyper-Tou...13=959&veh=sem
__________________
2005 Newmar Essex 4502, 2013 Caddy SRX
1997 HR Endeavor 37, CAT, 1996 Geo Tracker
|
|
|
03-12-2019, 10:58 AM
|
#10
|
Senior Member
Newmar Owners Club
Join Date: Aug 2015
Location: Greensboro, Ga.
Posts: 455
|
So I called Newmar and they connectected me with Intervac Design group.
Did some troubleshooting which is what you guys helped me with in this thread.
They think it’s the circuit board.
They overnighted it to me should receive later today and install.
Fingers crossed
__________________
Dave H
|
|
|
03-12-2019, 11:44 AM
|
#11
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: Jun 2011
Location: Texas
Posts: 6,427
|
It is amazing how badly documented this system is. There is nothing online that mentions the battery in the wand, or the fact that it is remote controlled. Only clue is the part number ending in RM.
__________________
2022 London Aire 4551 * 2022 GD Imagine 2800BH * 2021 RAM 3500 DRW * 2020 Wrangler
NHSO (Newmar Hoot, Sevierville Original)
Kindness Matters
|
|
|
03-12-2019, 01:13 PM
|
#12
|
Senior Member
Join Date: Nov 2017
Location: Citra, Florida
Posts: 1,396
|
Newmar and Intervac should get kudos though, sounds like they were right there when called.
__________________
Good Luck and keep us posted please. "Q"
1999 Newmar, Mountain Aire 3768, V-10, CAI, Headers.
"Spending our kids inheritance one trip at a time"
|
|
|
03-12-2019, 04:06 PM
|
#13
|
Senior Member
Newmar Owners Club
Join Date: Aug 2015
Location: Greensboro, Ga.
Posts: 455
|
So Itervac overnighted me a circuit board.
They were great
Stayed on phone with me and walked me through replacing board.
No problem got old board out put new board it.
Before I buttoned it back up plugged vac back in turned in on.
It worked
Then in the process of putting back together a very small transistor fell off the board.
It was never soldered into the board.
I asked them who made the board
Answer “China”
Another board overnighted for tomorrow delivery
At least I know where problem is!
__________________
Dave H
|
|
|
03-12-2019, 05:21 PM
|
#14
|
Senior Member
Newmar Owners Club Winnebago Owners Club Spartan Chassis RV Trip Wizard
Join Date: Mar 2006
Location: Tyler, Texas
Posts: 573
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|