|
01-11-2013, 03:47 PM
|
#1
|
Senior Member
Newmar Owners Club
Join Date: Jun 2011
Location: Venice, Fl
Posts: 151
|
Kitchen Slide
Last time I used the slide I heard the voice it unlocked , then just sat there, I pressed button it opened and closed normally. Today I just get the voice and it unlocks. Anyone have idea where to start? Electrical is not my strong suit. I do have a green light at the switch that just blinks. I would think there is juice to the switch. Not sure where to start after that. Any ideas would be greatly appreciated.
__________________
2004 Newmar DSDP 4025
Blue ox , Air force 1, 2016 GMC Acadia
NRA Benefactor
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
01-11-2013, 03:50 PM
|
#2
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: Nov 2010
Location: Estero, FL
Posts: 406
|
I had a similar issue that turned out to be a loose connector on the logic board, which is located in the basement on the street side. I called Newmar and they were very helpful diagnosing the problem.
__________________
Tom and Karen
2014 Newmar Mountain Aire 4369
2019 Jeep Grand Cherokee Ltd.
|
|
|
01-12-2013, 12:26 AM
|
#3
|
Moderator Emeritus
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
|
The new slide spec in QT's 1 & 2 may help you out, there is other links there also on slides.
You may also need to find your 12v fuse panel suppling the control boards for slides and tighten up the screws on the ground buss and fuse location wire they can become loose from road vibration.
All stickies above have info for your use when I am not around.
|
|
|
01-12-2013, 05:12 AM
|
#4
|
Senior Member
Newmar Owners Club
Join Date: Jun 2011
Location: Venice, Fl
Posts: 151
|
Quote:
Originally Posted by Tomp4801
I had a similar issue that turned out to be a loose connector on the logic board, which is located in the basement on the street side. I called Newmar and they were very helpful diagnosing the problem.
|
Tom
Is logic board the same as control module?
Thanks
Rick
__________________
2004 Newmar DSDP 4025
Blue ox , Air force 1, 2016 GMC Acadia
NRA Benefactor
|
|
|
01-12-2013, 06:13 AM
|
#5
|
Senior Member
Newmar Owners Club
Join Date: Jun 2011
Location: Venice, Fl
Posts: 151
|
I love electrical. I tried it this morning and it works perfect, tightened all the ground wires just for good measure and we'll see how it goes.
__________________
2004 Newmar DSDP 4025
Blue ox , Air force 1, 2016 GMC Acadia
NRA Benefactor
|
|
|
01-12-2013, 11:03 AM
|
#6
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: Nov 2010
Location: Estero, FL
Posts: 406
|
Quote:
Originally Posted by Angler3041
Tom
Is logic board the same as control module?
Thanks
Rick
|
Yes..... There are 2 multi-pin connectors on the board. I reseated both connectors and my problem, which was intermittent, went away.
__________________
Tom and Karen
2014 Newmar Mountain Aire 4369
2019 Jeep Grand Cherokee Ltd.
|
|
|
01-12-2013, 12:38 PM
|
#7
|
Moderator Emeritus
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
|
You need also to check the positive wire leads also for loose wiring.
Cleaning and reseting the control board plugs as mentioned may help also,
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|