|
|
10-01-2022, 06:16 AM
|
#99
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: Jun 2011
Location: Texas
Posts: 6,427
|
I suggest everyone scroll up to the top and each the videos I have shared from headlight revolution that show the comparison of a retrofit vs bulb swap.
Post #11 shows the comparison and gives a lot of information.
Post #2 shows the process I performed, which can be done for most vehicles. It is specifically designed for older vehicles that do not have a led reflector option available.
__________________
2022 London Aire 4551 * 2022 GD Imagine 2800BH * 2021 RAM 3500 DRW * 2020 Wrangler
NHSO (Newmar Hoot, Sevierville Original)
Kindness Matters
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
10-01-2022, 06:37 AM
|
#100
|
Senior Member
Join Date: Feb 2021
Posts: 1,083
|
Quote:
Originally Posted by richardkronz
In my 30 plus years of working on vehicles I have never seen a bulb make a headlight pattern like you have in that picture. Not halogen, not hid, and not led. I don't know what you have there but bulbs don't have a cut off like that. It's too drastic in your pictures. With a little adjustment and led can successfully provide more light and not blind other drivers. You're getting way too far in the weeds with this. Maybe you work for headlight revolution! LOL
|
That's a standard cutoff.
As you know, it isn't the bulb that creates that line, but the high-beam shutter. It isn't "drastic," it's correct.
As Red has mentioned and you seem to be missing, is that it's the HOUSING, not a "little adjustment" that creates proper patterns and limits glare and hot-spots.
As you've shown yourself, this isn't an easy DIY to get right. Unless you've measured and tested the cutoff and pattern you run the risk of blinding oncoming traffic.
|
|
|
10-01-2022, 07:31 AM
|
#101
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: Jun 2011
Location: Texas
Posts: 6,427
|
Quote:
Originally Posted by propchef
That's a standard cutoff.
As you know, it isn't the bulb that creates that line, but the high-beam shutter. It isn't "drastic," it's correct.
As Red has mentioned and you seem to be missing, is that it's the HOUSING, not a "little adjustment" that creates proper patterns and limits glare and hot-spots.
As you've shown yourself, this isn't an easy DIY to get right. Unless you've measured and tested the cutoff and pattern you run the risk of blinding oncoming traffic.
|
I spent approximately 10 hours total getting it done properly over a period of 5 weeks. Maybe the 2nd one would be about 5 hours, but probably more like 8.
As you said, definitely more involved than a simple bulb swap.
I am from Texas, and understand that the only way to have a good brisket is low and slow. Others are fine with microwave brisket.
Bulb swaps to led is the microwave brisket.
__________________
2022 London Aire 4551 * 2022 GD Imagine 2800BH * 2021 RAM 3500 DRW * 2020 Wrangler
NHSO (Newmar Hoot, Sevierville Original)
Kindness Matters
|
|
|
10-01-2022, 08:11 AM
|
#102
|
Senior Member
Newmar Owners Club
Join Date: Aug 2021
Posts: 428
|
Quote:
Originally Posted by redbaron73
I spent approximately 10 hours total getting it done properly over a period of 5 weeks. Maybe the 2nd one would be about 5 hours, but probably more like 8.
As you said, definitely more involved than a simple bulb swap.
I am from Texas, and understand that the only way to have a good brisket is low and slow. Others are fine with microwave brisket.
Bulb swaps to led is the microwave brisket.
|
That’s the best analogy I’ve heard in a long time! I’ve got a 2023 LA coming in the spring and I’m going to go your route, RB. That is if the headlight housings in the 2023 are the same as the 2022. Haven’t been able to get confirmation of that yet. If you know, I’d appreciate if you could confirm.
|
|
|
10-01-2022, 08:29 AM
|
#103
|
Senior Member
Join Date: Apr 2021
Posts: 147
|
Quote:
Originally Posted by Mighty_J
That’s the best analogy I’ve heard in a long time! I’ve got a 2023 LA coming in the spring and I’m going to go your route, RB. That is if the headlight housings in the 2023 are the same as the 2022. Haven’t been able to get confirmation of that yet. If you know, I’d appreciate if you could confirm.
|
You may want to wait til you get yours.
Supposedly the 23’ has upgraded headlights?
|
|
|
10-01-2022, 08:40 AM
|
#104
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: Jun 2011
Location: Texas
Posts: 6,427
|
Quote:
Originally Posted by Mighty_J
That’s the best analogy I’ve heard in a long time! I’ve got a 2023 LA coming in the spring and I’m going to go your route, RB. That is if the headlight housings in the 2023 are the same as the 2022. Haven’t been able to get confirmation of that yet. If you know, I’d appreciate if you could confirm.
|
It is the same assembly according to newpar.
__________________
2022 London Aire 4551 * 2022 GD Imagine 2800BH * 2021 RAM 3500 DRW * 2020 Wrangler
NHSO (Newmar Hoot, Sevierville Original)
Kindness Matters
|
|
|
10-01-2022, 08:41 AM
|
#105
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: Jun 2011
Location: Texas
Posts: 6,427
|
Quote:
Originally Posted by NewmarDave
You may want to wait til you get yours.
Supposedly the 23’ has upgraded headlights?
|
Just brighter Sylvania bulbs. No discernable difference. The bulb is shown in my Pic above.
Notice they did not make the mistake of using an led bulb.
__________________
2022 London Aire 4551 * 2022 GD Imagine 2800BH * 2021 RAM 3500 DRW * 2020 Wrangler
NHSO (Newmar Hoot, Sevierville Original)
Kindness Matters
|
|
|
10-01-2022, 09:07 AM
|
#106
|
Senior Member
Newmar Owners Club
Join Date: Aug 2021
Posts: 428
|
Quote:
Originally Posted by redbaron73
|
And why didn’t I go look at Newpar? Thanks RB! I’ve got a nice winter project now!
|
|
|
10-02-2022, 12:33 PM
|
#107
|
Senior Member
Join Date: Apr 2015
Location: Middle GA
Posts: 362
|
Headlight Assy x ref for 2021 CS?
Anybody know what make/model/year(s) headlight assembly are used on 2021 Canyon Star (mine is 3927)? This is the Freightliner Front Engine Diesel (MC Chassis).
__________________
George and Linda
-2021 Newmar CS 3927 toy toter
-2016 F150 Supercrew TOAD
|
|
|
10-02-2022, 01:46 PM
|
#108
|
Senior Member
Newmar Owners Club
Join Date: Aug 2021
Posts: 428
|
You can check the dot code stamped into the front lense of the headlight assembly. Once you’ve got it, Google it and you’ll get lots of hits.
__________________
Jason
2023 Newmar London Aire 4586, 2020 Ford Ranger
2022 Newmar Ventana 4334 2020 Canyon Star 3722
|
|
|
10-02-2022, 02:24 PM
|
#109
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: Jun 2011
Location: Texas
Posts: 6,427
|
Quote:
Originally Posted by evofxdwg
Anybody know what make/model/year(s) headlight assembly are used on 2021 Canyon Star (mine is 3927)? This is the Freightliner Front Engine Diesel (MC Chassis).
|
Looks like 2014-2016 Nissan Rouge
__________________
2022 London Aire 4551 * 2022 GD Imagine 2800BH * 2021 RAM 3500 DRW * 2020 Wrangler
NHSO (Newmar Hoot, Sevierville Original)
Kindness Matters
|
|
|
10-02-2022, 04:12 PM
|
#110
|
Junior Member
Join Date: Mar 2020
Location: Apple Valley, Ca.
Posts: 27
|
I have a 2019 Ventana, it looks like they used 2007 Dodge Dodge Nitro light housing. Searching for aftermarket LED lights, brings up new housings with different projectors but they still use halogen bulbs. I almost bought a set then read the fine print, the only thing LED is the turn signals and the halo lights. Does anybody know if these will work with LED bulbs or would it be the same as putting them in stock housings?
https://www.ebay.com/itm/27462517873...hoCNKwQAvD_BwE
|
|
|
10-02-2022, 04:34 PM
|
#111
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: Jun 2011
Location: Texas
Posts: 6,427
|
Quote:
Originally Posted by Ventana-3412
I have a 2019 Ventana, it looks like they used 2007 Dodge Dodge Nitro light housing. Searching for aftermarket LED lights, brings up new housings with different projectors but they still use halogen bulbs. I almost bought a set then read the fine print, the only thing LED is the turn signals and the halo lights. Does anybody know if these will work with LED bulbs or would it be the same as putting them in stock housings?
https://www.ebay.com/itm/27462517873...hoCNKwQAvD_BwE
|
Same as halogen. I have the same problem with my 2011 suburban, cannot find an easy swap for led projectors.
__________________
2022 London Aire 4551 * 2022 GD Imagine 2800BH * 2021 RAM 3500 DRW * 2020 Wrangler
NHSO (Newmar Hoot, Sevierville Original)
Kindness Matters
|
|
|
10-22-2022, 09:12 AM
|
#112
|
Senior Member
Newmar Owners Club
Join Date: May 2008
Location: Tabernacle NJ
Posts: 130
|
Did these last year for our 2021 Dutch Star
|
|
|
|
|
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|