Our 2017 Baystar is all LED lighting, works great. However, the LEDs over the dinnette are really bright and it would be great if we could put them on a dimmer. Anyone know if these can be put on a dimmer?
__________________
Newmar, Baystar 3401 (Lucille) towing 2008 Wrangler 6 speed with Ready Brute Elite bar attached to Blue Ox Baseplate
Formerly 2005 Winnebago Minnie 31C
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Newmar Owners Club Tiffin Owners Club Entegra Owners Club
Join Date: Feb 2017
Location: Fulltiming Since 2011
Posts: 1,493
Hi - Some LEDs can be dimmed and some can't. I'd call Newmar to ask them or look up the led by manufacturer and model to see their specs. You might do just as well by getting a different type of LED that is different in it's "whiteness" or has a lower output.
Tom
__________________
Tom and Annie & Java
2022 Anthem 44B
Hi - Some LEDs can be dimmed and some can't. I'd call Newmar to ask them or look up the led by manufacturer and model to see their specs. You might do just as well by getting a different type of LED that is different in it's "whiteness" or has a lower output.
Tom
.... yup ... some can be dimmed ... some can't (they just go off/on). I adjusted mine by selecting an Led with less lumens. Typically, you also want Warm White or the light looks a bit harsh. It's like photography, the color is influenced by surroundings (cabinet/floor/window tint/upholstery. The dreaded "paint looked awesome in Home Depot"
John, that looks like a nice device. I need to take some measurements etc. to see how I'd install it so it looks like it belongs there. Also will probably send and email to Newmar JUST to make sure my particular LEDs can be dimmed.
Thanks all for the input!
__________________
Newmar, Baystar 3401 (Lucille) towing 2008 Wrangler 6 speed with Ready Brute Elite bar attached to Blue Ox Baseplate
Formerly 2005 Winnebago Minnie 31C
.... yup ... some can be dimmed ... some can't (they just go off/on). I adjusted mine by selecting an Led with less lumens. Typically, you also want Warm White or the light looks a bit harsh. It's like photography, the color is influenced by surroundings (cabinet/floor/window tint/upholstery. The dreaded "paint looked awesome in Home Depot" 
Linear Mode
