 |
04-30-2021, 05:17 PM
|
#1
|
|
Senior Member
Newmar Owners Club
Join Date: Apr 2012
Location: Georgia
Posts: 444
|
Lost Acorn....help please
2016 Newmar Ventana 4037 on Freightliner chassis
Lost one of these on my rear duals. There are two of them that hold the chrome Dicor cover in place on the wheel. Dicor does not make these any longer so they are no help. Newmar parts website does not list them.
Ive searched and searched for one of these and cant find a part number to order the correct size. Part of my problem is I dont know the correct size. I've measured with calipers and it appears to be 24mm but cant find this size anywhere (and not very sure of my measure skills with very old calipers). Not close to any truck stops so I can check.
I'm hoping one of my fellow Newmar owners can provide me with a part number.
TIA
Steve
__________________
Steve & Debbie + Bentley-Std Poodle
2016 Newmar Ventana LE 4037
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
04-30-2021, 05:36 PM
|
#2
|
|
"Formerly Diplomat Don"
Newmar Owners Club
Join Date: Apr 2005
Location: Moorpark, Ca.
Posts: 21,954
|
I believe that logo on the wheel is a Pacific Dually Wheel simulator.
https://www.pacificdualies.com/
__________________
Don & Mary
2019 Newmar Dutch Star 4018 (Freightliner)
2019 Ford Raptor
|
|
|
|
|
05-01-2021, 03:11 AM
|
#3
|
|
Senior Member
Join Date: Jun 2013
Posts: 160
|
I don't have the part number, but while we were at the Newmar Service Center this past week, they had them in stock in the parts department. Give them a call on Monday and you can order one
__________________
2020 Ventana 4037
2016 Jeep Wrangler 75th
Days Camped, Never enough
|
|
|
|
|
05-01-2021, 04:08 AM
|
#4
|
|
Senior Member
Join Date: Jul 2015
Location: Watertown NY USA
Posts: 5,517
|
In the meantime either remove the cover entirely or put a small hose clamp on the wheel stud so the cover stays put.
__________________
2002 Fleetwood Storm 30H on Workhorse P32 chassis 8.1 gas.
|
|
|
|
|
05-01-2021, 04:31 AM
|
#5
|
|
Senior Member
Join Date: Jan 2017
Location: Little Rock, Arkansas
Posts: 2,586
|
How important is it that it be an exact match? Maybe you could take the other one to a truck or trailer dealership and find one that works. As long as it's the proper thread and deep enough to tighten.
__________________
2021 Keystone Outback 221UMD
2018 Tundra Limited 5.7 liter
|
|
|
|
|
05-01-2021, 08:51 AM
|
#6
|
|
Senior Member
Join Date: Sep 2016
Location: Sarasota, FL
Posts: 5,183
|
Quote:
Originally Posted by bowpulpit
2016 Newmar Ventana 4037 on Freightliner chassis
Lost one of these on my rear duals. There are two of them that hold the chrome Dicor cover in place on the wheel. Dicor does not make these any longer so they are no help. Newmar parts website does not list them.
Ive searched and searched for one of these and cant find a part number to order the correct size. Part of my problem is I dont know the correct size. I've measured with calipers and it appears to be 24mm but cant find this size anywhere (and not very sure of my measure skills with very old calipers). Not close to any truck stops so I can check.
I'm hoping one of my fellow Newmar owners can provide me with a part number.
TIA
Steve
|
I guess I'm confused. Are you talking about the lug nut cover? You can order those caps many places. It slips on and off the lug nut using one of these tools https://cdn2.bigcommerce.com/server1...0.1280.jpg?c=2
__________________
Rick and Larrie Dee
1997 40' Newmar London Aire DP CTA 8.3 (Mechanical) 325 Spartan MM
Bringing her back to her glory.
'08 Jeep GC Overland.
|
|
|
|
|
05-01-2021, 03:06 PM
|
#7
|
|
Senior Member
Join Date: Oct 2015
Location: Apex, NC
Posts: 214
|
I had the same problem with my Bay Star. Unfortunately, my wheel is 19.5", so my lug nut is probably smaller than yours. I initially ordered one that looked correct, but the thread turned out to be wrong. I finally found the correct thread size by going to Auto Zone with another of the "acorns" and tried them on a board that had different size screws imbedded on it. Auto Zone didn't carry the acorns, but I did finally find them online from a number of sellers. On the part I bought, it is called a Dicor Enclosed Jam Nut. My part number was V195F9EJNM, but as I said, that's probably too small for your coach.
Hope you find the right size.
__________________
2012 Newmar Bay Star 2901, CHF, Roadmaster Steering Stabilizer, 2009 Honda CR-V toad.
|
|
|
|
|
05-02-2021, 07:57 AM
|
#8
|
|
Senior Member
Newmar Owners Club
Join Date: Apr 2012
Location: Georgia
Posts: 444
|
Thanks for everyone's input. Based on your comments and more sluthing I found my part number. It's 22mm and the number is V19582-EJN. Did a search on the internet and believe it or not the best price was with Newmar parts. Ordered two so I have one as a backup The Newmar part number is 04641 Simulator ENC Jam Nut/LNC 22mm. In the meantime checked my other wheels and the one's on my steer tires were tight but not so for the rear. Suggest you check yours.
__________________
Steve & Debbie + Bentley-Std Poodle
2016 Newmar Ventana LE 4037
|
|
|
|
|
05-02-2021, 08:04 AM
|
#9
|
|
Senior Member
Join Date: Jan 2017
Location: Little Rock, Arkansas
Posts: 2,586
|
Quote:
Originally Posted by bowpulpit
Thanks for everyone's input. Based on your comments and more sluthing I found my part number. It's 22mm and the number is V19582-EJN. Did a search on the internet and believe it or not the best price was with Newmar parts. Ordered two so I have one as a backup The Newmar part number is 04641 Simulator ENC Jam Nut/LNC 22mm. In the meantime checked my other wheels and the one's on my steer tires were tight but not so for the rear. Suggest you check yours.
|
I'm thinking a dab of blue LocTite may be in order since these really aren't torqued that much. Mine have stayed on, but still wouldn't hurt.
__________________
2021 Keystone Outback 221UMD
2018 Tundra Limited 5.7 liter
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
