|
01-22-2022, 07:32 AM
|
#1
|
Senior Member
Join Date: Mar 2009
Location: Apollo Beach & Key West , FL
Posts: 3,839
|
Maytag refer ice maker quit--- ideas ??
Ice maker on our Maytag French door refer ( model MFI2269VEM10) just quit... was working good for the past couple months we've been traveling. Water dispenser in door works fine. Switch is on, arm is down.... guessing there is a solenoid or relay somewhere that's not working. Any experience in troubleshooting this ? Maytag website is not very useful, just high level suggestions. Thanks !
__________________
2013 DS 4338
2015 F-150 toad with kayaks,bicycles and a Harley in the back
new toad 2023 Sprinter with all the toys inside
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
01-22-2022, 09:01 AM
|
#2
|
Senior Member
Join Date: Nov 2015
Posts: 26,843
|
__________________
I took my Medication today. HAVE YOU?
Dodge 3500 w/Tractor Motor
US NAVY---USS Decatur DDG-31
|
|
|
01-23-2022, 06:31 AM
|
#3
|
Senior Member
Join Date: Mar 2009
Location: Apollo Beach & Key West , FL
Posts: 3,839
|
Quote:
Originally Posted by Old-Biscuit
|
thanks -- good info in the post
__________________
2013 DS 4338
2015 F-150 toad with kayaks,bicycles and a Harley in the back
new toad 2023 Sprinter with all the toys inside
|
|
|
01-23-2022, 09:56 AM
|
#4
|
Senior Member
Damon Owners Club
Join Date: Apr 2020
Location: Clovis NM
Posts: 4,389
|
Just for the info; icemakers in Fridges are the number 1 failure item.
__________________
2006 Damon Daybreak 3276 35'with 5 Star Tuner. 3 200 Amp Lithium batteries and 2000 watt PSW inverter/charger. 2013 Elantra on a Master Tow dolly.
Retired USAF
|
|
|
01-23-2022, 10:04 AM
|
#5
|
Senior Member
Winnebago Owners Club
Join Date: Sep 2015
Posts: 1,813
|
I fixed mine by removing it (extra freezer space) and buying a $109 countertop ice maker.
__________________
2006 Winnebago Journey
39K
Cat C7
|
|
|
01-23-2022, 11:53 AM
|
#6
|
Senior Member
Spartan Chassis
Join Date: Mar 2017
Posts: 1,545
|
Quote:
Originally Posted by amosnandy
I fixed mine by removing it (extra freezer space) and buying a $109 countertop ice maker.
|
X2 only mine didn't quit I just prefer a countertop because I can use water from the Berkey.
|
|
|
01-23-2022, 11:57 AM
|
#7
|
Senior Member
Join Date: Jul 2020
Posts: 820
|
Had the same problem with my fridge in the house. The ice maker line was frozen. Unplugged the fridge for about 4 hours. Learned about that on U Tube. With all the doors remaining shut, nothing spoiled. When I plugged the fridge back in, all worked like it should. Just needed the ice maker line to thaw out.
__________________
2018 Phaeton 44OH
2023 Chevy Traverse Toad
Florida
|
|
|
01-23-2022, 06:13 PM
|
#8
|
Senior Member
Join Date: Nov 2018
Posts: 200
|
There have been times when my ice maker quits….when I have my temp settings at maximum cold,backing them off a step allows whatever is freezing up to thaw,and ice making resumes……
__________________
Joe B 2024 King Aire previously 2019 King Aire
|
|
|
01-23-2022, 08:30 PM
|
#9
|
Senior Member
Join Date: Mar 2016
Location: Fort Myers, FL
Posts: 604
|
When my ice maker stopped, I pulled the Ice Maker Module off and found that a couple of pins were burned. I cleaned them up and got another couple of months out of the unit. Ultimately, I had to replace the ice maker. Prices for this thing were all over the board. From $55 to $350. The one I got said it was OEM and cost around $135. Overall, it was a pretty easy job.
-B
__________________
Full time RVer since 4/2016. Newmar Mountain Aire 4523 - Jeep Rubicon - Harley FLTCR - 2022 F450 Platinum, 2022 Momentum 351MS-R with Curt Flex Air hitch and MORryde IS - Also considering a Polaris General 4 Seater and a Can Am Spyder RT
|
|
|
01-27-2022, 12:10 PM
|
#10
|
Member
Join Date: Feb 2007
Location: Live Oak, Fl
Posts: 85
|
lasting repair
If you are good with a soldering iron you can solder jumpers around the burnt pins in the controll module. This has keep mine going for serveral years now.
BW
__________________
Bob & Terry Wallace
2013 Newmar Dutch Star 4018
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|