That sounds like the support material Newmar uses to keep the water panel from flapping. The panel attaches to the angle aluminum and that aluminum attaches either to structural wall or nothing at all.
I am guessing this is a piece that attaches to nothing else and the sheet metal screw on one end stripped out the hole during install and wiggled out.
It's only purpose is to reduce flexing on the panel.
__________________
2022 London Aire 4551 * 2022 GD Imagine 2800BH * 2021 RAM 3500 DRW * 2020 Wrangler
NHSO (Newmar Hoot, Sevierville Original)
Kindness Matters
|