Need to add new receptacle, how?
We have already removed front TV and built a new cabinet and door in its place. The door has the same smoked Lexan installed.
We want to remove the J Couch and build a desk in it place. We will mount our TV there on a TV lift. We will be moving the DVD and Receiver into the desk along with our printer(all of this is on one side of the desk), the other half will house a file drawer and one or two smaller drawers. No center drawer.
We think we will need at least Three receptacles. Two receptacle (4 plugs) for TV, one for DVD, one for the receiver, and one for the Lift. the third will have a 12v plug for charging phone, tablets, and one plug for spare. My problem is how do we run new wires from the panel box in bedroom?Between floor and basement ceiling and then come up? Or try to get it into the side cap(Roof) and come down. Our kitchen is on a slide but the j couch is not. Our setup is Passenger seat, j couch and then kitchen. Don't want to play with the in and out of slide.
Another part of this system is that we will at some time later be adding Solar to the roof(At least 400Watts). It is my understanding that I will have to split my 12v and 120v fuses that I want to be run from the solar system and the rest either off generator or plugged in some where.
Where does one find the same kind of fuse panel that Newmar uses if I am going to have to do it later for Solar?
I am probably missing something so feel free to ask questions.
Thanks for all your help.
TPJ Theresa Prissy (Sorry to say, has gone over the Rainbow Bridge) and Joe
__________________
'04 Newmar DSDP 4009, Spartan MM, 370HP ISL Cummins, 2015 HD FLHTKL
Joe, Theresa, and Prissy(Australian Shepard)
|