Oasis Zone Fault
I was exercising (starting engine, running generator, running ac/heat) a friends coach today and found that they had no heat. It is a 2017 LADP with the Silverleaf system. Same model that I have, so I am familiar with the system operation. It was 64 degrees outside today and I turned on the heat pumps for 68 degrees, NO JOY. When I toggled down into the Oasis system there was a "Zone Fault" message. If I turned off the heat and turned on air conditioning, things were fine. Tomorrow I will check the zone board module for a blown fuse and put the bypass switch in bypass and see what happens. Anybody with experience with this particular issue that can lead me in a correct path, please chime in.
Wayne, Cindy, & Golden Retriever Finn
2017 London Aire, 2014 CRV, Go Hokies