Community Forums

tmasiero1200 · 01-20-2020, 05:01 PM

Does anybody know if there is an option for an opening passenger window on 2020 4369 Dutch Star.

Thanks Tom

deaton · 01-20-2020, 05:17 PM

I know that’s not on the options list. You might check with Newmar CS to see if they would entertain it as a Special.

My 08 Monaco had a passenger window that opened. My 17 DS did not. I would guess that if Newmar does not stock such s window for other coaches, the answer is going to be no.

ShelbyTom1 · 01-21-2020, 01:09 PM

When we ordered our new Dutch Star my wife pushed to get a window that opened.
Newmar denied it.

tmasiero1200 · 01-21-2020, 07:10 PM

Just heard from the Dealer $800.00 installed.

2020 DSDP 4369

deaton · 01-21-2020, 07:48 PM

Is that a Newmar install or a dealer aftermarket install?

ShelbyTom1 · 01-22-2020, 01:21 PM

Quote:

Originally Posted by deaton

Is that a Newmar install or a dealer aftermarket install?

tmasiero1200 · 01-23-2020, 05:32 PM

The dealer Ordered the window thru Newmar and the dealer will install it. 4 to 6 weeks to get.

67vette · 01-25-2020, 05:23 AM

Out of curiosity what model is the window coming from and who is the installer/dealer?
Thanks

RJ77 · 01-25-2020, 02:22 PM

Ordered one from dealer for my 2016 DS. Dealer confused because the window only came in a frame type but I said I didn't care. Kind of stupid to put a stationary window next to the passenger seat. Window and install under $400 at Holland RV Palm Desert, CA

ShelbyTom1 · 01-25-2020, 11:28 PM

Quote:

Originally Posted by tmasiero1200

The dealer Ordered the window thru Newmar and the dealer will install it. 4 to 6 weeks to get.

Will the window powered or will it open manually?

dav-cle · 01-26-2020, 05:17 AM

Last year I had my passenger window in my 2011 MADP replaced because of fogging. Replaced it with a manual framed window that opens. All windows on coach are frameless except in cockpit ! The installation was done at the factory.

Rev. Roy · 01-27-2020, 12:00 PM

I understand why Newmar denies these kinda things. 1 Modifications like this would slow down the whole assembly line process. 2. Design changes require engineering, cost of change, and testing. For a single unit it's inefficient. 3 There is warranty concerns about the "ripple effect" it may have on other components. When a dealership does modifications they assume the liability.