|
|
04-21-2013, 07:57 PM
|
#1
|
Member
Join Date: Mar 2013
Location: 40.548028,-90.870087
Posts: 43
|
Rear LED TV
I installed a 32' Vizio LED tv in the bedroom of our 4304 DSDP. Thank you to all the contributors to the forum, I have gained the confidence to do several repairs, adjustments and modifications.
__________________
Dave
06 DSDP 4304
08 Jeep Wrangler Rubicon
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
04-21-2013, 07:59 PM
|
#2
|
Senior Member
Join Date: Oct 2012
Location: Las Vegas, NV
Posts: 611
|
Hmmm...DW and I watch TV in the living room, we do other things in the bedroom....
Looks like you did a great job!
__________________
Don (RVM19) & Mary,
Furry friends Sophia & Zander
2006 Coachmen Freedom 289QB | 2004 Jeep
I used to be indecisive. Now I'm not so sure..
[SIGPIC][/SIGPIC]
|
|
|
04-21-2013, 11:48 PM
|
#3
|
Moderator Emeritus
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
|
Good job, glad we could help you out.
Hands on experience best way to learn.
|
|
|
04-22-2013, 04:34 PM
|
#4
|
Senior Member
American Coach Owners Club
Join Date: Nov 2012
Location: We fulltime, so everywhere
Posts: 548
|
I did kinda the same thing in my 4304, except I raised my TV, mounted it to plywood, then mounted the whole thing to a piano hinge. This allowed me to flip up the TV to access the cabinet behind it. Also by raising the TV up it creates a space below it, so I enclosed that area, trimed it out and made a shelf for the alarm clock, change...etc. All in all much better than the old tube TV.
You did a good job, looks nice.
__________________
Command Master Chief (USCG, RET)
2017 London Aire 4553
|
|
|
04-22-2013, 04:41 PM
|
#5
|
Senior Member
Tiffin Owners Club
Join Date: Apr 2011
Posts: 597
|
My main TV up front is a 32" LED that I put in this winter. Looks like you did a great job installing it.
__________________
Jack & Kay
2015 Allegro 32CA Ford Chassis
FMCA #341229
|
|
|
04-22-2013, 04:54 PM
|
#6
|
Senior Member
Newmar Owners Club
Join Date: Jun 2010
Location: New Brunswick CANADA
Posts: 688
|
great job
how is the 32 incch held - I am aware of the removable wood around the old TV - thanks
__________________
2006 Dutch Star DP 400 ISL-AutoMotion Shades
Spartan Chassis
Norcold out (1 more)
|
|
|
04-22-2013, 08:39 PM
|
#7
|
Member
Join Date: Mar 2013
Location: 40.548028,-90.870087
Posts: 43
|
A metal bracket from the clearance aisle at Wally World.
__________________
Dave
06 DSDP 4304
08 Jeep Wrangler Rubicon
|
|
|
04-23-2013, 06:14 PM
|
#8
|
Senior Member
Newmar Owners Club
Join Date: Jun 2010
Location: New Brunswick CANADA
Posts: 688
|
Quote:
Originally Posted by dhfinc
A metal bracket from the clearance aisle at Wally World.
|
Metal bracket from Wally (that must be W Mart ).....but no explanation on the installation - Thanks !!
__________________
2006 Dutch Star DP 400 ISL-AutoMotion Shades
Spartan Chassis
Norcold out (1 more)
|
|
|
04-23-2013, 08:16 PM
|
#9
|
Member
Join Date: Mar 2013
Location: 40.548028,-90.870087
Posts: 43
|
The bracket that I bought was oversized for the tv and the space, so I cut it down so it just fit the width of the cabinet.
__________________
Dave
06 DSDP 4304
08 Jeep Wrangler Rubicon
|
|
|
04-23-2013, 08:32 PM
|
#10
|
Member
Join Date: Mar 2013
Location: 40.548028,-90.870087
Posts: 43
|
Sorry this is "continued" from last post. I removed the wood extension and trim that framed the old CRT tv. I then cut down the width of the metal bracket so it would just fit inside the cabinet and the height so that it would fit the tv. I screw it to the bracing that holds the front of the cabinet in and set the height of the tv so that some of its weight would be resting on the bottom of the wood frame, also the sides of the tv were just wide enough to fit pretty snugly as well. In the morning I will go out and get the make and model of the bracket and post it on this thread. I have not road tested the install as of yet but it looks to be a pretty good fit. One good thing about the new LED tv's is that they are very light. The one I bought says 27lbs shipping weight
__________________
Dave
06 DSDP 4304
08 Jeep Wrangler Rubicon
|
|
|
04-23-2013, 08:40 PM
|
#11
|
Member
Join Date: Mar 2013
Location: 40.548028,-90.870087
Posts: 43
|
Sorry I keep ending my post prematurely! To complete my thought I'm guessing out of the box with no stand probably 20 lbs or less. I don't know what the old one weighed in at, but I'm guessing north of 60. For my next project I would like to install a outdoor entertainment center. I will try to take some more photos and make some notes as I do that.
Dave
__________________
Dave
06 DSDP 4304
08 Jeep Wrangler Rubicon
|
|
|
04-23-2013, 08:48 PM
|
#12
|
Member
Join Date: Mar 2013
Location: 40.548028,-90.870087
Posts: 43
|
This link Has some very helpful info on removing old tv.
|
|
|
04-23-2013, 08:52 PM
|
#13
|
Senior Member
Join Date: Jun 2012
Location: AB
Posts: 7,587
|
We used a 26" Samsung to replace the old CRT. Made for some valuable storage space and spot for the Sat. Receiver.
__________________
2019 Unity LTV CB, pushed by a 2013 Honda CRV, BlueOx Baseplate, Aventa Bar & Patriot Brake
|
|
|
04-24-2013, 12:13 PM
|
#14
|
Member
Join Date: Mar 2013
Location: 40.548028,-90.870087
Posts: 43
|
This is the bracket that I used. It was probably heavier than needed. If you are any good at fabricating you might come up with something better. Possibly wood? I'm a bit of a "wood butcher" rather than a carpenter so I chose metal.
__________________
Dave
06 DSDP 4304
08 Jeep Wrangler Rubicon
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|