Getting ready to take out the carpet and little bit of hardwood in kitchen, on our 2007 Kountry Star. KSCA 3681
We want to go with a marble looking - vinyl tile/plank.
Some say to use a click together floating product, the other half say the only way to keep it in place is to glue it down.
The concern we have is the 14' wall slide and opposing wall, 7' kitchen slide and their rollers going over the new flooring. Reading a number of posts, it could scratch the new flooring, or else break the click part of the tiles and push/buckle the flooring.
The current hardwood is 1/2' thick, and would be thicker than what we were going to replace it with. Also in the kitchen, it would be impossible to get at all the hardwood under the cabinets, without removing the slide.
Any suggestions, would be much appreciated
Linear Mode
