I spoke with Newmar but still unsure exactly what I will see when I remove the access plate and drill a 2" hole. Will I see the end of a coaxial cable that would then ( with a short cable ) connect to the dish on the roof?
In the cabinet above the tv the only open connection is "out" I take it I run a cable from the splitter " out " to the receiver?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I spoke with Newmar but still unsure exactly what I will see when I remove the access plate and drill a 2" hole. Will I see the end of a coaxial cable that would then ( with a short cable ) connect to the dish on the roof?
In the cabinet above the tv the only open connection is "out" I take it I run a cable from the splitter " out " to the receiver?
Any photos? Are you drilling up or down?
__________________
2023 Reflection 150, Model 280RS
Tow Vehicle - 2022 Ram 2500
Linear Mode
