Community Forums

tom9615 · 10-20-2016, 11:16 AM

Looking for some help. Need a pic of where the driver or passenger seat belt attach to the floor on a 1999 Newmar diesel pusher. Any and all help appreciated. Thank you for your time

Tom Porath

Skip426 · 10-21-2016, 11:37 PM

I'm packed up and traveling on my trip south , I'll try to make time tomorrow to dig out my camera and post the pictures you're after.
Do you need an tape measure in frame for the location .
Do you have a drivers door?

tom9615 · 10-23-2016, 05:55 AM

Thanks for the reply Skip. No I dont't need measurements. Yes I have a drivers door. A pic of both passenger and drivers side seat belts would be great. Thank You for your time

Skip426 · 10-24-2016, 11:33 AM

Tom , sorry for the delay ; DW had packed my camera , for our trip south and it took me a while to find it.

#1 Drivers side above floor.
#2 Passenger side above floor
#3 Drivers mount bolt below floor
#4 Passengers mount below floor , taken from wheel well.
Because the pass. side is mounted further back and in from the wall than the drivers side , they had to weld the extension on the tube frame to anchor the bolt.
If these aren't all you need , let me know , I might not have internet tomorrow, but should have when I hit Vegas on Wed. night.