SeeLevel II Tank Monitor(s) Don't Handle Tank Heaters

[blaisdf]

Thinking about upgrading my KIB tank monitor system to a SeeLevel II. I have an all-electric coach with heating pads on the black and grey tanks (see panel image). I'd like to be able to use this function with a SeeLevel monitor, but they don't offer a monitor configuration like mine.



There is the 709-P3 that has FRESH, GREY, BLACK and WATER PUMP.

https://www.irv2.com/forums/attachme...1&d=1726781285

Then there is the optional monitor (709-HP3W) that has FRESH, GREY, BLACK, LPG, plus WATER HEATER and WATER PUMP switches -

https://www.irv2.com/forums/attachme...1&d=1726781285

Question: Could I use the WATER HEATER switch to run the tank HEATING PADS instead? ignoring the LPG button altogether.

[oldenavy]

I put SeeLevel monitors in my last coach and got the Bluetooth version. Mounted their panel in the wet bay and used the phone app to monitor tank levels inside the coach.

You could leave all your existing monitors and tank heater control as is from the factory that way. Snaking wires from sensors to the panel is also much easier if you don’t have to put the new panel inside the coach.