SeeLevel tank monitoring system for a 4369

[MikeGriffin]

I've read some of the articles here about SeeLevel systems and their wiring, but am wondering about a few things as we are close to sending in our order. I'd like to ask the factory to install in-wall wiring where possible so that the after-delivery installation will be easier.

1. Where is a good place to mount the interior display panel? The overhead (over the passenger) seems like it's already too crowded?

2. What wiring should I ask the factory to install? XXga (x2??) from the tanks to the power bay? Then something else to the interior panel?

Thanks in advance -

["007"]

In QT's # 3 PDR John's Mod's he has a thread on its installation if your having a new coach built Newmar may install on special item.

[PDR John]

Others have replaced all the factory readouts with the Sealevel kit. Those did require replacing the whole panel upfront.

The upside of this is; you get to lay everything out how you would want it.

I believe the factory will only run 12 gauge wire for you. Others that have done it will be along soon enough to verify.

[Ken Gluckman]

I installed See Levels in my Mountain Aire a few years ago. I put the main readout in the bathroom and a second one in the water bay. That worked out really well, as the time when you most need to know the water level is when you are using the bathroom.

Ken

[ravensdad]

We have a 2014 DSDP 4369 and our tank gauges are Digi-Level from Precision Circuits. The sensors are mounted on the outside of the tank and detect the level thru the wall of the tank. Check them out at www.precisioncircuits.com