Slide bolt tightening

[gimlimike]

After reading so much here about loose slide bolts I have been itching to get at them. The two slides ( kitchen,living room) were found easily and all the bolts were loose, not hand turning loose but able to turn 3/4 turn to tighten with my ratchett.

Now the bedroom slide, under the bed I could see two nuts on the bearing which I tightened a bit but no other bolts similar to the other slides.

Am I missing something here ?

Thanks

["007"]

look down near the bottom of this link and you will see different motor combinations one is bedroom slide and arrows indicating the bolts on motor gear house locations.

[gimlimike]

Thanks again 007 !