Slide out control panel blinking lights

[Rouski]

2005 dutch star newmar,
kitchen slide out when I push the button it talks to me and then unlocks but then it does nothing.lights under on control board blink. after waiting a few minutes and pushing the slide out button twice so its set to go the same way again I wiggled the square wiring block that go into the controller and the light stops blinking and the slide goes in or out like its suppose to. any ideas on what could be causing the error (blinking light) I believe its the middle light out of the three lights.maybe just using some contact cleaner so it makes a good connection?

[Camper25]

Welcome to the forum.

[MSHappyCampers]

Hi ! Welcome to IRV2! We're sure glad you joined the gang!

I would spray the connections with a cleaner that has lubricant, such as the Radio Shack Tuner Cleaner. Plug and unplug the connectors several times after spraying to let friction help with the cleaning!

Good luck, happy trails, and God bless!

[momdoc]

Welcome to the forum.

You are joining a good group of folks here with good info to share. Read the various threads here and ask questions as they come up or add info if you can. Look at the threads on slides here as welll.

Good luck and enjoy the adventure!

["007"]

Welcome to the Newmar forum.
A cleaning sounds like a good idea,You may have 12v locks in each upper corner of slide that may need cleaning or replacement they are called Actuators, ===== this link will have many items for you and a new slide info link, Slides the Good, Bad and Ugly.
The links below in my signature have answers for you also.
Enjoy the forum and safe travels.

[Rouski]

Thank you 007,spraying some lubricant into the plugs did the trick working good now. again thanks.